Meantime

Reference

The shawl hasn’t been the only thing that I have been on these last couple months. I have briefly stopped work on the vest to start a sweater from the same book

The pattern is Ansley from the Jane Ellison Queensland Collection. The yarn that I am using is Mas Acero from Brooks Farm that I got this past spring and MDSW. One thing that I did not pick up on with the yarn until now is that the shade changes from one end of the skein to the other. I am not so sure I like that. But I will keep going with it, doing the sleeves next, and if need be, ripping out the back and reknitting it so that the color progression matches the rest of the sweater.

And now that the bobbins are free from the shawl yarn, I can do some more spinning again.

I finally plied up the silk/camel in Titania from Dragonfly Fibers. I just have two more two ounce braids to spin up in the Bad Moon Rising colorway, and all of this silk and camel will be ready to go on the loom.

And as a little treat for both me and a friend, I spun up this.

This is Siren Song UNSPUN! in the Equinox colorway from Fiber Optic. Being a pencil roving, it spun up really fast. It was the first time spinning this particular roving from Kimber, and once fulled, it was extremely soft. I just gave it to a friend of mine last night as a gift. She has just learned to knit lace, so maybe this will find its way into a shawl or something.

Kimber is also having a gradient spin-along on Ravelry. This is the gradient that I am spinning.

It is the olive to slate gradient. I will let you how I am spinning it the next time. Warning, it may seem like crime what I have done with it….

Copyright 2011 by G. P. Donohue for textillian.com.

Race for the Cure 2011 post-show

Race day, which was two weeks ago now, was a brisk but sunny day; and as usual, my stomach was turning before the event. The nervousness starts on the drive to the event, as the last few miles take an eternity to drive because traffic is so backed up. Granted, I have learned my lesson with that, but the traffic back up seems to get worse every year. A blessing and a curse, I guess.

Once the car was parked, I got myself to the starting line. I didn’t get a spot as close to the starting line this year as last year because I really don’t like worming my way through all of those people, jockeying for position. They all just kind of look at you like, “And who do you think you are?” And somehow, the response, “The one that is going to beat you to the finish line!” doesn’t seem appropriate.

Not jockeying for a position closer to the starting line turned out to be a big mistake, because my time (24:31.4) was close to a minute slower than last year. And all of that lost time was in the first mile, trying to get out from behind people who decided that maybe they will just walk instead. While the 1 mile clock said 7:00 when I past it last year, it said 8:15 when I passed it this year. Oh well, live and learn.

The actual race isn’t the primary reason for being there anyway.

Everybody there was racing for someone.

I wrote down who I was racing for.

Thank you all for your sponsorship to help me do this.

Now for the shawl.

It is completely finished and ready to go to the winner of the drawing, Joan Hajek.

It took me a while this year to come up with a project to make. Part of the problem is finding a project with some kind of pink in it that I will actually like doing, because I am not a pink person. Surprise! Then, in July, I got the last shipment from Spirit Trail Fiberworks fiber club. Of course, the thought of this shawl didn’t occur to me until the night that Irene hit us when I saw the notice that Jennifer had post on Ravelry that she had 10 ounces still available of the colorway. While the storm was raging away on us, I was messaging with Jennifer to get the rest of the superwash BFL. Good thing we didn’t lose power until later that night!

After spinning the fiber up, I had to figure out what pattern I was going to use to weave it. Since I was using the same yarn for both the warp and the weft, I wanted a pattern that didn’t instantly scream “PLAID!!!!” After playing around with different drawdowns (weaver-talk for how we figure out a weaving pattern), I settled on the one below.

It is what is called a progressive twill, which basically means a basic twill pattern that gets its starting point shifted over to a different set of treadles with each start of the repetition. I thought the long diagonal would be longer than any color repeats, and thus play down the plaid a bit. (BTW, I have nothing against plaids. It was just not something that I wanted to go for here.)

Overall, I think the idea was kind of successful.

On the loom, the shawl was sett at 15 ends per inch, with a weaving width of 16″. Coming off the loom, the shawl measured 14.5″ X 59″. After fulling, the shawl measures 13.25″ x 54″. None of those measurements include the fringe. I believe a good bit of the draw-in, take-up, and shrinkage is due to using wool singles, which have a great deal of energy to release. A plied yarn in a less elastic fiber probably wouldn’t have shrunk down so much.

Again, thank you all for your help and support. I already have next year’s fiber on order!

Copyright 2011 by G. P. Donohue for textillian.com.

Kinky

Woohoo! Socks are done.

The toe and the heel of these socks are from Charlene Schurch class I took back at the MDSW. For the toe, I used Becker’s magic cast on, rather than knitting a rectangle as the basis for the toe. I think I am going back to the rectangle method, as the magic cast on gives two little points on the toe when the sock is actually on the hoof. For the heel, it is a matter of increasing a number of stitches, than knitting a trapezoid for the bottom heel, followed by picking up stitches along the sides of the trapezoid and gradually knitting in the increased stitches into the back of the heel. That works pretty well, so I may be doing that again.

Not that I waited to be done the socks to start this, but last month I was spinning up July’s shipment from Spirit Trail Fiberworks‘ club.

It is superwash BFL that I spun up as a single at around 24 epi. When I saw a notice on ravelry that she had more of the roving available, I contacted her (during Irene, no less) and snapped up the rest of it. Once it arrived, I spun that up to match the initial shipment so that I had a total of 18.6 ounces of singles.

With that much of one yarn, a woven shawl sounded like a good idea, so the last 10.6 ounces spun got wound into a warp, and the warp is currently being put on the loom.

The yarn is kind of kinky right now, which is making it a bit of a pain sleying the reed, but it is not too big of a deal. I think I might add a dummy warp to the end of all of these warp ends so that I can use as much of the warp as possible.

Who am I weaving this shawl for? More about that later.

Copyright 2011 by G. P. Donohue for textillian.com

Keep On Truckin’

Reference

It’s been a while since you have heard from me, again, hasn’t it. Every time I think about posting to my blog, I think, if I just wait until X, I can include that in the post as well! The last of those items on the X list happened today, so today I am posting.

First off, I finished some spinning. Both of these fibers are from Fiber Optic.

The first is the 50% superwash merino/ 50% bamboo blend that I got as part of her “As the Whorl Turns” club. It was great to spin, as it was pencil roving and required no predrafting on my part. The second is the BFL/silk that I got from her at MDSW dyed in the gradient from gold-crimson-espresso. It spun incredibly fast. Both need to be blocked yet, since I plan to knit with both of them, but that can wait.

Next up is a toy that I knit for my great-nephew’s first birthday.

The pick-up truck pattern and yarn came as part of a kit from Knitpicks. It was a great project, though sewing the tires on with the black yarn really was a test for my eyes. Here is the little guy after opening up the gift.

He seems to actually like it! And, he will still be able to use it no matter how much of a growth spurt he has.

Finally, the socks in the slip stitch plait pattern are done.

This are part of my gift to Mr. Penney for his birthday, which is today! They are in his favorite color (and that was no accident.) The yarn, Sanguine Gryphon‘s Bugga, was great to work with. Luckily, I have more of this in my stash, so more socks will be on the way (like that was ever in question.)

Happy Birthday, Mr. Penney!

Copyright 2011 by G. P. Donohue for textillian.com

Color My World

Reference

While I loved working with the natural gray of the blanket, it was time for some color after completing it. Luckily, it was also time to finish up another project.

My YMCA socks are done. These socks are nice and comfortable and fit well. As an added bonus, the colors didn’t pool or form any noticeable pattern that I could distinguish. Cheers all around!

With YMCA done, I permitted myself to start a new pair of socks.

This is a slip stitch plait pattern that I got out of one of my stitch dictionaries. Part of the pattern is to drop the stitch that has been slipped for a couple rounds while working other stitches before picking it back up to knit it so that the whole pattern looks like a cabled pattern. It was felt odd to purposefully drop a stitch, but it all works out ok because the stitch originates a couple rounds below the round that is being work, so the dropped stitch does not get pulled or anything that would cause a run of dropped stitches. (I hope that all made sense, because I can’t think of another way to describe it.)

The yarn is Sanguine Gryphon’s Bugga that I got at MDSW. It is possibly the softest sock yarn that I have ever felt. No wonder people go on about it like they do.

While we are on green projects, I am trying to get myself back to weaving on my smaller loom.

This is Atropos from Spirit Trail Fiberworks that I got as MDSW a few years ago. I starting putting this warp on the loom a while ago, but let it drift off because warping this loom became a pain, literally. Now that I know that I can use the stepstool to sit on while threading heddles, I hope to get back to it this weekend, as this project has been mocking me every time that I go down into the basement. Just mock mock mock. We shall see who has the last laugh.

There has been spinning as well. Over Memorial day weekend, I did quite a bit of spinning.

The blue at the top is more of the merino/bamboo from Fiber Optic, while the bobbins below it are each two ounces of the BFL/silk in the Espresso-Crimson-Gold gradient that I got from Fiber Optic at MDSW. There will be a good bit of plying action that will be happening soon (mostly to free up bobbins for continued spinning).

On the future spinning front is this.

Back in April was the weaving guild’s auction, and I was lucky enough to get the day with the guild’s dyeing study group. The day was back in May, and I dyed this cashmere and silk blend that I had along with a yak and merino blend that is not seen here. I steamed the rovings the following weekend, and despite my best attempts to ruin everything (the plastic wrapped “burrito” actually fell into the water and boiled away for a while), it all came out great. There are places where I didn’t apply enough dye, but I figure those will work out somehow when I spin it all up.

So, is that enough color for you?

Copyright 2011 by G. P. Donohue for textillian.com

Hip to Be Square

Reference

So it all started with the gray Romney fleece that I got at last year’s Maryland Sheep and Wool Festival.

That fleece then got spun into singles.

The result of all of that spinning was 10 skeins of singles that contained over 200 yards that were about 14 epi.

Now, I knew I wanted to make a throw, but I wasn’t sure on the design or the colors. I really wanted to dye the yarn to coordinate with the family room; but I am a rather inexperienced dyer, and I am not that secure in my color sense.

Well, I ordered some colors of Washfast acid dyes from Pro Chemical and Dye. They arrived, and they just sat there. I could not decide which colors to use, nor could I figure out how I was going to dye singles and not wind up with a kinky, curly mess. Oooh, kinky!

In the meantime, I started playing around with possible weave structures for the blanket. I already had the idea in my head to do a rib weave similar to this shawl that I wove for my mother a while ago.

After playing around with it, I decided that I wanted to weave squares into the fabric and use a broken twill inside the squares so that the diagonal that you see in the shawl doesn’t distract from the squares.

And then, still more procrastination about color. So much procrastination that is now April, and I need to get a warp on the loom if I want to get this blanket done in time for the festival. So, color problem solved, there will be no dyeing of the yarn because there is now no time for it and the complications that might ensue.

I divided up the ten skeins into groups that were consistent in thickness within the skein and from skein to skein. Those five skeins together would be the weft for the blanket, and the rest would be used for the warp, since it is easier to manipulate where warp threads fall to disguise inconsistencies in yarn.

It turns out that I was pretty consistent throughout most of my spinning, with only one skein that was more thick and thin than the rest. I wound the five warp skeins on my warping mill, and sleyed the thick and thin skein across the width of the blanket in the reed, and filled in the spaces with the other four warp skeins. Overall, the reed was sleyed at 10 epi. Then, I started threading heddles.

Notice that the sectional beam isn’t on my loom anymore. After about five years on the loom, I figured it was impeding my weaving rather than helping it. With the sectional beam off, I am no longer confined to having to have my weaving with being a multiple of two inches. Maybe someday when I am the production weaver that I have always imagined myself to be, the sectional beam will go back on the loom, but not until that day comes.

In threading the heddles, I also found that we have a little Rubbermaid stepstool that is just the right height for me to sit on and do the threading. I have never threaded so many heddles without having a backache after doing so. It was truly a great find.

Once the heddles were threaded, the warp was tied onto the back beam, wound on, then tensioned and tied onto the cloth beam. Weaving commenced, and went fairly quickly, when you consider the size of the weaving.

The only real problem that I had was the selvedges. The selvedge thread kept on getting pulled into the main body of the weaving, rather than staying as the outer most thread. I have an idea of how the solve this for the next time, but I didn’t think of it until I was through with the weaving on this blanket.

After weaving, I did a blanket twist on the fringe (which seemed to take forever), fulled the blanket, let it dry, and trimmed the fringe.

Here is a close up that shows the weave structure.

Overall, I was pretty happy with the way it came out. For a medium course wool (it is a Romney fleece), the blanket is soft and pretty lightweight for what it is.

At the festival, the blanket got a third place in its category and got a Best of Maryland Wool award. I was honestly a little disappointed to get a third place, but was assured that first through fourth place were extremely close in my category and were not decided until the last possible moment. This I believe, because I happened to be there to set up the display of entries, and they still hadn’t decided my category an hour after they were supposed to be done with the judging. That’s the way the ball bounces, sometimes.

Copyright 2011 by G. P. Donohue for textillian.com

The Weekend

Reference

Ah yes. Another year, another Maryland Sheep and Wool Festival. What a time. The day before the festival, I helped one of the vendors, Jennifer of Spirit Trail Fiberworks, set up her booth. She had an armada of helpers, most of whom I recognized from years past when visiting her booth. Myself and one other person were the new faces.

Set up only took a three hours, and we were done. She had things pretty well organized, as expected for doing this festival and a number of others for a few years now. As a thank you, I got a little something-something, which you will see later when I show my haul. Yes, this little piggy went to market!

Later that day, I went back to help set up the skein and garment competition after the judging. As a special bonus, Mr. Penney came along to help out. After seeing the goings on with the set up, I think Mr. Penney is really wanting to provide his organizational skills to the task. Either that, or never come back again. One or the other.

Finally came Saturday, the opening day of the festival, and I took a half day course with Charlene Schurch on new toe-up heels for socks.

This is what we made. Don’t worry, it is not supposed to fit anyone. And I would be worried if it did fit someone. The heel at the bottom is the reverse French heel and the heel towards the top is the unwrapped short row heel. It was a great class, and if you have the chance to take a class from Charlene, I would advise you to do it.

After class, I met up with my friend Bonnie and we grabbed a little lunch and went on our way, shopping. Oh, and did I shop. Look for me on an upcoming episode of Hoarders! I’ll just tell you which booth I purchased what you see below. If you really want to know what it is, I should have it up on my stash page on ravelry soon. Also, the name of the photos will give you a pretty good idea of what the yarn and/or fiber is.

First, Spirit Trail Fiberworks, some purchased, some being the thank you from Jennifer.

Next, Fiber Optic, which, to my and apparently their own surprise, had their own booth this year. Apparently, they were asked on Saturday morning if they could replace one of the vendors that dropped out at the last minute.

And, then came Sanguine Gryphon.

Next up, Cloverhill’s booth, which had Wullenstudio, Dragonfly Fibers, and many others.

I finally joined the club this year and made a purchase from Brooks Farm to knit a sweater. (Actually, I had made a purchase of mohair from them many years ago, of which I made my nieces scarves.)

And my regular purchase of Romney and mohair blend from the Barefoot Spinner.

What you don’t see here is the Romney x Corriedale fleece that I purchased at Triple R Farm because it immediately went to Zeilingers to be processed.

What happened to the Romney fleece that I purchased last year from Triple R Farm?

I went back to the festival Sunday afternoon to pick up my entry. More on that the next time.

Copyright 2011 by G. P. Donohue for textillian.com

Tight Fit

Reference

Yeah! I got another pair of socks done.

It seems like it has been forever since I have completed a pair of socks, and after trying on the first sock of this pair, I was almost going to rip them out and try again. I had a devil of a time trying to get the sock past my heel because the ribbing of the leg was so tight. I am glad I didn’t rip out though because, of all of my socks, these stay up on my legs the best. Yes, there is a little effort in getting the socks on; but once they are on, they are on!

The sock yarn is Dragonfly Fibers Djinni Sock in the Bad Moon Rising colorway. I love this colorway, so much so that I have the same colorway in her camel and silk roving which I started spinning last night. I was able to start spinning the camel and silk because I finished spinning the singles of this.

This is Sea Monster roving in the December Baby colorway, again from Dragonfly Fibers. What you see on the bobbin is a four ounce braid that I spun up a couple weeks ago, and the actual roving before being pre-drafted is taking up the rest of the picture. All it takes me is about four hours to pre-draft and spin a four ounce braid of this stuff. The fiber content is 50% silk/30% merino wool/20% seacell. Once I get into a plying mood, I will be making a two ply that I will use for weaving a scarf or shawl, depending on the yardage.

With having a long weekend, I finally got the first slip stitch sock done.

This sock is off the needle now after doing 25 rows of 3×3 ribbing for the cuff. It is great when a plan comes together, and that is what is happening here. The yarn is Shiela’s sock yarn in Green Tamborine and WItchy Woman. This is taking a little longer than anticipated because of all of the slip stitches. Eight rows of the slip stitch pattern equates to about six rows of stockinette in length. Not a big deal, but something to keep in mind for later.

Ok, now brace yourselves. You are about to see something that you haven’t seen on this blog in a while. Are you ready? Here it is. Continue reading

Lucas with the Lid Off

Reference

Knitting is still going on here, especially with my weaving undergoing a re-group. More on that in the next post.

My first new project of 2011 turns out to be my first completed project of 2011.

This is Elizabeth Zimmermann’s Maltese Fisherman’s Hat from Knitters Almanac. I used two strands of Berroco’s Ultra Alpaca throughout. Even with using two strands, the gauge only wound up being 11 stitches per 3 inches. The instructions are for 11 stitches per 4 inches. Luckily, most of the numbers were divisible by 3 in the pattern, so it was a simple matter to changing things over to meet my gauge.

I had to do this in quick order, because it is for a friend that is, literally, closing up shop and moving to Portugal. Yeah, wild thing to do! He wanted a traditional hat that is worn over there, and this Maltese hat was pretty close to the description, so I went with that. It took about all of 8 hours to knit. I used size US 10.5 needles (6.5 mm), which felt odd to me, being that I am usually working with 2.25 mm and 2.5 mm needles for socks.

And I am still working with those small needles, though.

The first of the ribbed cable socks is done, and I have cast on for the second. I went to the trouble of twisting the knit stitches when doing the tubular cast off, since the whole rib is worked with twisted knit stitches. Now that I see how it looks, I am not sure if that addition effort for the cast off was worth it. Maybe it will be more noticeable after the sock has been washed.

I am also still working on the slip stitch sock.

I did a short row heel because it solves a multitude of problems in doing things with a slip stitch pattern that I am just not sure how to do (like increases and decrease). Short row was always for the plan for me here, anyway.

I would like to know how to handle the change in colors in the round.

There is more than subtle change where the start of the round is. I am not to worried about it, but it would be nice if there was a way to avoid this. Since this is a slip stitch pattern, I have my doubts about whether a “jogless” jog would work here. Any thoughts?

Copyright 2011 by G. P. Donohue for textillian.com

We Need a Little Christmas

Reference

Miss me? I have been busy, and the blog keeps sliding down the priority list. As an update, I am still working on the ribbed cable sock in Bad Moon Rising colorway of Dragonfly Djinni.

I moved over to doing these in Magic Loop, as the small 12″ circular needle becomes difficult to work cables in once I get to the leg of the sock.

Since we were having guests over for dinner earlier in the week, I had to do some cleaning up, and the easiest way for me to clean up roving that is “lying around” is to spin it! Yes, for me, spinning yarn counts as cleaning. Doesn’t it for everyone?

In any case, this is what I spun up.

Both bobbins contain four ounces of Dragonfly’s Sea Monster roving, which is 50% silk, 30% merino wool, and 20% Seacell (which is made from seaweed, thus Sea Monster.) The colorway in my had is Oberon and the one still on the wheel is Indian Corn. I picked them both up at the trunk show Kate had at Cloverhill back in November. The fiber spun up super fast. It was the easiest time I have had spinning something with silk in it. I am planning on using the singles together to weave a scarf, but that weaving is going to have to wait a while.

I have to admit, I wasn’t really in the Christmas spirit this year. To try and kick start that spirit, I started these:

This is a slip stitch pattern that I heavily modified to fit the stitch count of the sock. The yarn is Sheila’s Wullenstudio sock yarn in Green Tamborine and Witchy Woman. I was wondering whether the red was going to be too strong for the green, but now that I actually have things underway, I can relax because I think they are working out together just fine. And I can happily say that I am in the Christmas spirit.

Good thing, because I have a lot of work to do.

Hope you all have a Merry Christmas!

Copyright 2010 by G. P. Donohue for textillian.com