Reversible Cable Scarf

I didn’t originally plan this to be my next post, but I wanted something upbeat, and this project is that for me.

The yarn is a yarn that I spun from Fiber Optic’s BFL/silk roving dyed in the Espresso-Crimson-Gold gradient. The pattern is based on something that I saw in a kntting magazine back in the 80’s for a baby blanket. In fact, I did a similar design for some scarves that I knit my nieces about 15 years ago.

Here is the “pattern” if you are interested in making your own. Pattern is in quotes because I am just going to give you general guidelines for how to do this rather than specific stitch counts and such so that you can do this with any yarn you wish, and do as many cables and such as you desire.

The reversible cable is done over a 1×1 rib (knit one, purl one). For this scarf, the cable is over 12 stitches. You will probably want the stitch count for each cable to be a multiple of 4, because of when you actually get to doing the cable, a multiple of 4 stitches will keep the cable looking the same on both sides of the work. (A knit/purl pair on each leg of the cable. (1k + 1p) x 2 = 4 sts.)

To do the cable, slip half of the stitches for the cable onto a cable needle (or whatever spare needle you might have on hand. I frequently use a double point that happens to be lying around). Knit one, purl one for the other half of the stitches for the cable. Now, knit one, purl one the stitches that you slipped onto the cable needle. All of the other rows of the cable are just knit one, purl one across.

Now how often do you do the cabling twist row? Generally, if I have a cable that is X stitches across, I will have the cable repeat every X rows. In this case, since the cable is 12 stitches across, I did the cabling twist every 12th row. The first cabling twist happened on the 9th row, as I like to have cables start 2/3rds in. (You might think I miscalculated there, but while I am doing the twist on row 9, the twist appears between rows 8 and 9, so the row 8 is actually the end of the cable. Row 9 is the start of the next cable repeat.)

As for what to put around the cable, I used Irish moss stitch. On the version that I made for my nieces years ago, I used seed stitch. Garter stitch would be another good option. Here, I used 12 stitches on either side of the cable (so the scarf was a total of 36 stitches). Do whatever is pleasing to your eye. In general, I like tend to like have my stitch numbers relate to each other somehow, partly because it makes it easier to remember things, and because I am an engineer that study pattern recognition for my graduate work. TMI, I know.

One final note for the pattern, I slipped the first stitch and purled the last stitch of each row to give me a nice edges. For things like garter stitch and seed stitch, I don’t always do this, however.

And finally, on a personal note, thank you all for your thoughts and prayers in the past week. They are very much appreciated

Copyright 2012 by G. P. Donohue for textillian.com


Comments

3 responses to “Reversible Cable Scarf”

  1. I’m amazed at how nicely all the colors line up in your scarf, it turned out beautifully! The reversible cable is very nice as one-sided scarves can be a little irritating, like when I need to gently remind Al to flip his scarf over. I appreciate your edging technique, too.
    I hope you and your family are doing as well as possible during this difficult time.

  2. Love the reversible cables, how nice of you to write it out for us!

  3. Hannah K Avatar
    Hannah K

    I agree with Lyn. Thank you for writing this! I didn’t even think of using a 1-1 rib to make the back look neater for cable work. Now it’s just obvious… and my future projects will be vastly improved by your shared wisdom.

    Also, LOVE the dye job. It’s just gorgeous.