{"id":326,"date":"2008-03-06T19:51:15","date_gmt":"2008-03-07T00:51:15","guid":{"rendered":"http:\/\/www.textillian.com\/?p=326"},"modified":"2008-03-06T19:51:15","modified_gmt":"2008-03-07T00:51:15","slug":"end-of-the-road","status":"publish","type":"post","link":"https:\/\/www.textillian.com\/?p=326","title":{"rendered":"End of the Road"},"content":{"rendered":"

Reference<\/a><\/p>\n

\"Tubular<\/a><\/p>\n

Some people have shown interest in the tubular bind off that I use, and so here is an attempt at instruction for how I do it on 2×2 rib.<\/p>\n

Tubular bind off provides a nice amount of stretch; and I use it for toe-up socks<\/a>, top down hats<\/a>, neckbands<\/a>, basically anything that ends with ribbing. Most instructions that I have seen show it on 1×1 ribbing, so I will be doing it on 2×2 ribbing.<\/p>\n

The way that I figured this out thinking of it as\u00a0a variation on the kitchener stitch (which explains why it is also called a kitchener bind off.) The difference being that instead of trying to join two knit fabrics on two different knitting needles, I am trying to join two knit “faces” of the same fabric on one needle.<\/p>\n

(Apologies ahead of time for the lousy lighting in the pictures. The sun had not yet come up with I started this.)<\/p>\n

    \n
  1. I start the process by having the next stitch on the left-hand needle be the first knit stitch of the 2×2 rib.
    \n\"start<\/a><\/li>\n
  2. I then measure out that yarn that I need to do the sewing. Five to seven times around the stitches is plenty if the stitches aren’t really compacted together on the knitting needles.
    \n    \"measure<\/a><\/li>\n
  3. I thread the sewing needle (a Chibi) with the yarn and bring the needle out through the first knit stitch on the left-hand knitting needle.
    \n    \"sewing<\/a>
    \nI pull the sewing needle all of the way through this stitch. Through this entire process, I stop drawing the yarn through as soon as I feel the least bit of resistance because this means one of two things: the yarn is caught on something (a knitting needle, a knot, etc.) or the end of the yarn has been reached. If the cause\u00a0is some kind of obstruction, I take care of it and keep pulling, otherwise I move on to the next step.\u00a0I believe this to be the key to getting a nice even bind off with plenty of stretch.<\/li>\n
  4. Next, I put the sewing needle into the last stitch on the right-hand knitting needle and out through the first purl stitch on the left-hand knitting\u00a0needle.
    \n    \"in<\/a>
    \nAgain, I drawn the yarn through these stitches.
    \n    \"draw<\/a>
    \nI make sure that the sewing yarn stay underneath the needles, otherwise I might mistake the sewing yarn for an actual stitch on the knitting needles.<\/li>\n
  5. Here is where the repetition comes in. Everything from here on out happens on the left-hand knitting needle.
    \nI bring the sewing needle in through the first knit stitch of the rib,
    \n    \"sewing<\/a>
    \ntake that knit stitch off of the knitting needle,
    \n    \"take<\/a>
    \nbring the sewing needle out through the next knit stitch on the knitting needle,
    \n    \"sewing<\/a>
    \nand draw the yarn through the stitches.<\/li>\n
  6. Next, I put the sewing needle into the next purl stitch on the knitting needle, which will be the second stitch from the knitting needle point.
    \n    \"sewing<\/a>
    \nI then bring the sewing needle out through the next purl stitch on the knitting needle (the third stitch from the end of the knitting needle.)
    \n    \"sewing<\/a>
    \nPlease note that the sewing needle stays under the knitting needle for all of this. The sewing needle movement is really one movement for me, with the tip of the sewing needle barely getting through the first stitch before it is coming out of the next stitch.
    \nI drawn the sewing needle and yarn through these purl stitches.<\/li>\n
  7. I then put the sewing needle into the knit stitch at the end of the knitting needle
    \n    \"sewing<\/a>
    \nand take this knit stitch and the next purl stitch off of the knitting needle.
    \n    \"take<\/a>
    \nI am taking two stitches off of the knitting needle here to make up for not taking any stitches off of the needle in the last step. I couldn’t take the purl stitch off because the knit stitch at the end of the needle was blocking it at the time.
    \nI bring the sewing needle out through the next knit stitch, which is now the second stitch from the end of the knitting needle.
    \n    \"sewing<\/a>
    \nThe sewing needle and yarn are drawn through these stitches.<\/li>\n
  8. I put the sewing needle in through the purl stitch at the end of the knitting needle,
    \n    \"sewing<\/a>
    \ntake that stitch off of the knitting needle,
    \n    \"take<\/a>
    \nbring the sewing needle out through the next purl stitch on the knitting needle (third stitch from the end of the needle,)
    \n    \"sewing<\/a>
    \nand draw the sewing needle and the yarn through these stitches.<\/li>\n
  9. From here, I continue going around the knitting with these last four steps until I get near the end,
    \n    \"continue<\/a>
    \nwith three stitches left on the needle.<\/li>\n
  10. At this point, I am going into a knit stitch with the sewing needle.
    \n    \"nearing<\/a>
    \nThe other two stitches on the knitting needle (purl stitches) have already been worked with the bind off, so the knitting needle can be completely removed. I place the sewing needle into the very first knit stitch that I worked to link up the beginning and the end of the bind off.
    \n    \"link<\/a><\/li>\n
  11. So that the yarn ends up on the wrong side of the garment, I go in through that last purl stitch in the round.
    \n\"last<\/a>
    \nThis amounts to same stitch as the very first stitch I did in this whole process.<\/li>\n<\/ol>\n

    The sewing yarn is now ready to be woven in.
    \n    \"ready<\/a><\/p>\n

    Leaving me with socks that were ready for the Project Runway <\/a>finale!<\/p>\n

    \"Finished<\/a><\/p>\n

    Fierce! (Actually, I was kind of disappointed that Christian won. I think Jillian is the better designer. A lot of Christian’s pieces in the final collection look too much like pieces that he did in previous episodes.)<\/p>\n","protected":false},"excerpt":{"rendered":"

    Reference Some people have shown interest in the tubular bind off that I use, and so here is an attempt at instruction for how I do it on 2×2 rib.<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[20,10,5,24],"tags":[],"class_list":["post-326","post","type-post","status-publish","format-standard","hentry","category-after","category-clothing","category-knitting","category-technique"],"_links":{"self":[{"href":"https:\/\/www.textillian.com\/index.php?rest_route=\/wp\/v2\/posts\/326","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.textillian.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.textillian.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.textillian.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.textillian.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=326"}],"version-history":[{"count":0,"href":"https:\/\/www.textillian.com\/index.php?rest_route=\/wp\/v2\/posts\/326\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.textillian.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=326"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.textillian.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=326"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.textillian.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=326"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}